This boat has been sold but here are some boats that are still For Sale

The boat featured is not currently for sale by Boatshed. The boat information and images presented are part of Boatshed’s back catalogue of the 20,000+ boats we have listed in the last 15 years and appear here for general information and guidance purposes about Boatshed and our boat selling systems and services
1/2 Tonner Cruiser/Racer

I want to see full spec & all the high res photos of this boat ,
Login or Register

Boat REF# 23011
removed from sale
Length 9.01m (29'7")
Year 1976
Construction GRP
Underwater profile Fin
Sleeping berths 7
Engine 1 x diesel 12hp, Yanmar YSE 12 (unknown year)
Lying Portsmouth


I want to see full spec & all the high res photos of this boat , register me now or login

Extra Details

Designer Ron Holland
Builder Southcoast Boatyard, Cork
Lying Portsmouth
Discounts available from our Preferred Partners
Fuel capacity 50.0 ltr (11.0 USG) Total - 1 Tanks
Last survey 01/06/2004


Engine 1 x diesel 12hp
Engine make and model Yanmar YSE 12 (unknown year)
Engine Hours Not Recorded
Engine Cooled Direct
Steering tiller
Drive shaft
Prop(s) 2 - blade bronze
Fuel consumption (approx) Not Recorded
Cruising speed (approx) 5 knots
Max speed (approx) 6.5 knots


10% Discount on Boat Insurance
Length 9.01m (29'7")
LWL 7.64m (25'1")
Beam 3.10m (10'2")
Draft Max 1.75m (5'9")
Displacement 4,020kg (8,864.1lbs)
Headroom 1.77m (5'10")


10% discount on rigging

Sloop rigged Eurospar Aluminium spars (2003) with Stainless Steel standing rigging (2003)


New Sails Upgrade?
Reefing mainsail Mountfield - Slab (1998)
Headsail - Furling (1998)
Other sails Spinnaker (unknown year)
Spinnaker (unknown year)
Spinnaker (unknown year)
Storm jib (unknown year)
Tri-sail (unknown year)
No. 2/3 (unknown year)
Spinnaker gear tick

Electrical Systems

12 volt, 2 batteries charged by: engine


10% discount on ultrasonic antifouling
Construction GRP
Underwater profile Fin
Finish Paint finish

Flexible water tank.


Total # of berths 7
No. of double berths 1
No. of single berths 5
Cabin(s) 2
Sink 1
Heads 1 heads
Stove tick
Broiler tick
Sink tick
Manual water system tick

Ducting in place for heating but heater u/s.
Removable table erected below or in cockpit.

2 burner propane Stove

Nav Equipment

Compass tick
Speed tick
Log tick
Wind tick
VHF DSC radio tick
GPS tick
Navtex tick
Clock tick
Navigation lights tick
Depth sounder tick

Deck Gear

Sail cover tick
Rode tick
Fenders tick
Boathook tick

2 halyard winches
4 sheet winches
2 anchors
(25lb Fisherman, Plough)
5.00m (16'5") of chain
20.00m (65'7") of rode

Safety Equipment

10% Discount on courses
Life buoys tick
Danbuoy tick
Swim ladder tick

3 bilge pumps (2 manual / 1 electric)

Broker's Comments

Well proven racer/cruiser designed by Ron Holland. This example is not the usual stripped out version, she has a few more creature comforts than you normally find on a 1/2 tonner.

But don't let that put you off if you want something competitive, all of the racing equipment is there with a great set of big winches and working just fine for a bit of "round the cans action".

Sensibly equipped with a good sail wardrobe and recently replaced mast and spars.

The hull is gleaming and she is anti-fouled ready to drop in the water.

This boat has been viewed and photographed by Peter of Boatshed Portsmouth. Register or log in to see 44 more photos of this boat. These boat details are subject to contract.

Note: Offers on the asking price may be considered.

Disclaimer The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed. These particulars are not and shall not form part of any offer or contract for the sale of the vessel and are supplied on the understanding that all negotiations shall be through Boatshed, who act as agents for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and, where considered appropriate, at his own expense, to employ qualified agents to carry out structural and/or mechanical and/or electrical surveys and inspections in order to assess the actual condition of the vessel before purchase.