This boat has been sold but here are some boats that are still For Sale

The boat featured is not currently for sale by Boatshed. The boat information and images presented are part of Boatshed’s back catalogue of the 20,000+ boats we have listed in the last 15 years and appear here for general information and guidance purposes about Boatshed and our boat selling systems and services
Colvic Sailer 26

I want to see full spec & all the high res photos of this boat ,
Login or Register

Boat REF# 67341
removed from sale
Length 7.90m (25'11")
Year 1980
Construction GRP
Underwater profile Bilge
Sleeping berths 5
Engine 1 x diesel 18hp, Yanmar 2GM20 (1992)
Lying North Devon


I want to see full spec & all the high res photos of this boat , register me now or login

Extra Details

Designer David Feltham
Builder Colvic
Lying North Devon
Discounts available from our Preferred Partners
Fuel capacity 36.0 ltr (7.9 USG) Total - 1 Tanks
Water capacity 22.0 ltr (4.8 USG) Total - 1 Tanks
Last survey 15/12/2005


Engine 1 x diesel 18hp
Engine make and model Yanmar 2GM20 (1992)
Engine Hours Not Recorded
Engine Cooled Direct
Steering tiller
Drive shaft
Prop(s) 3 blade bronze with rope cutter
Fuel consumption (approx) 2.0 ltr (0.4 USG) /hour At Cruising Speed
Cruising speed (approx) 5 knots
Max speed (approx) 6 knots

2 New seacocks in 2007
New exhaust in 2007


10% Discount on Boat Insurance
Length 7.90m (25'11")
LWL 6.90m (22'8")
Beam 2.70m (8'10")
Draft Min 1.10m (3'7")
Draft Max 1.10m (3'7")
Airdraft 10.05m (33'0")
Displacement 2,900kg (6,394.5lbs)
Headroom 1.80m (5'11")
Storage Ashore


10% discount on rigging

Sloop rigged SSS Aluminium spars (1980) with Stainless Steel standing rigging (unknown year)


New Sails Upgrade?
Reefing mainsail - roller boom (unknown year)
Headsail - Furling (unknown year)
Other sails Cruising Shute (unknown year)

All sails and rigging appear to be in good condition. The standing rigging is of heavy gauge and has probably been replaced since new.

Electrical Systems

12 volt, 2 batteries charged by: engine


10% discount on ultrasonic antifouling
Construction GRP
Underwater profile Bilge
Finish Gelcoat finish

The hull was epoxy coated below the waterline in 1996


Total # of berths 5
No. of double berths 2
No. of single berths 1
Cabin(s) 2
Sink 1
Heads 1 heads (Sea Toilet)
Stove tick
Broiler tick
Cooler tick
Manual water system tick
Fresh water wash tick
Non-Smokers tick

New cooker in 2002

2 burner propane Stove

Nav Equipment

Compass tick
Speed tick
Log tick
VHF DSC radio tick
Chart plotter tick
Autopilot tick
Clock tick
Barometer tick
Navigation lights tick

Raymarine RC435 Chart plotter.
Autohelm 1000.
Autohelm Tridata.

Deck Gear

Sail cover tick
Sprayhood tick
Spray dodgers tick
Rode tick
Fenders tick
Boathook tick
Swim Ladder tick

2 sheet winches
2 anchors
(Plough and Danforth)
27.00m (88'7") of chain

Safety Equipment

10% Discount on courses

1 bilge pumps (1 manual / 0 electric)

Broker's Comments

This Colvic 26 Sailer feels spacious inside for her size and as with Colvics she is sturdy and well built. This example is lying ashore but has been kept particularly clean and dry. A small amount of attention to the headlinings in the forepeak and finishing of the floor varnishing is all that obviously needs doing. The engine appears to be well looked after and has been serviced professionally. Step the mast, hoist the sails and she will provide a great medium sized cruiser for the summer.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.

This Colvic Sailer 26 has been personally photographed and viewed by Stephen Grimshaw of Boatshed Torquay. Click here for contact details.
Disclaimer The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed. These particulars are not and shall not form part of any offer or contract for the sale of the vessel and are supplied on the understanding that all negotiations shall be through Boatshed, who act as agents for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and, where considered appropriate, at his own expense, to employ qualified agents to carry out structural and/or mechanical and/or electrical surveys and inspections in order to assess the actual condition of the vessel before purchase.