This boat has been sold but here are some boats that are still For Sale

The boat featured is not currently for sale by Boatshed. The boat information and images presented are part of Boatshed’s back catalogue of the 20,000+ boats we have listed in the last 15 years and appear here for general information and guidance purposes about Boatshed and our boat selling systems and services
Hunter 40

I want to see full spec & all the high res photos of this boat ,
Login or Register

Boat REF# 77605
removed from sale
Length 12.19m (40'0")
Year 1985
Construction GRP
Underwater profile Fin
Sleeping berths 4
Engine 1 x diesel 40hp, Yanmar (unknown year)
Lying Clear Lake, Texas


I want to see full spec & all the high res photos of this boat , register me now or login

Extra Details

Designer Hunter
Builder Hunter Design Group
Lying Clear Lake, Texas
Discounts available from our Preferred Partners
Fuel capacity 181.8 ltr (40.0 USG) Total - 1 Tanks
Water capacity 477.3 ltr (105.0 USG) Total - 1 Tanks


Engine 1 x diesel 40hp
Engine make and model Yanmar (unknown year)
Engine Hours Not Recorded
Engine Cooled Indirect
Steering wheel
Fuel consumption (approx) Not Recorded

Diesel engine, fresh water cooled. Fuel tank: 38 gallons. 110 volt dockside power with 50' cord.


Length 12.19m (40'0")
Beam 4.09m (13'5")
Draft Min 1.83m (6'0")
Draft Max 1.98m (6'6")
Airdraft 17.83m (58'6")
Displacement 7,891kg (17,400.0lbs)
Headroom 1.98m (6'6")
Storage On marina


Sloop rigged Windex Aluminium spars (unknown year) with standing rigging (unknown year)


New Sails Upgrade?

Has patented B&R rigging system with no babystay or running backstays for better tracking. The swept back spreaders allow tighter sheeting angles of the head sails, and a smaller spar section reduces windage and interference with the leading edge of the mainsail. Dacron sails:main and furling, 110% genoa Jiffy reefing, main sheets. Two, two speed sheet winches, Two, two speed main sheet winches; Two, two speed halyard winches. Sheet stopper, Triple line organizers(2). Reefing/outhaul mast winch, internal halyards, prestretched dacron. Mainsheet traveler, inboard recessed genoa tracks with cars. Aluminum mast & boom Windex.

Electrical Systems

12 volt, 2 batteries charged by:


10% discount on ultrasonic antifouling
Construction GRP
Underwater profile Fin
Finish Gelcoat finish

The laminar flow section of the keel has been cast for a more accurate, more efficient shape. And an aircraft-type fairing provides a sleeker interface between the hull and the keel. Both the shoal and deep draft keels have sumps and recessed ears that distributes the load between the hull and internal frame.


Total # of berths 4
No. of double berths 2
No. of single berths 2
Cabin(s) 2
Shower 2
Heads 2 heads (Vac flush)
Oven tick
Sink tick
Cooler tick
Drapes tick
Cabin heating tick
Pressurised water system tick
Non-Smokers tick
Ice Maker tick
Microwave tick

Large double berth in aft cabin with lots of wraparound covered and open storage shelves. Two convenient reading lights and stereo speakers can also be seen. Forward of the main salon is another private sleeping area, again with own head and shower. It is roomy and contains plenty of additional storage space. The main salon encompasses dining entertaining, galley and planning areas. Large spacious dinette area. Fabric cushions, handcrafted selected hardwood trim, teak and holly cabin sole, stereo speakers, and lots of storage space. Storage areas behind sliding acrylic panels. The galley features stainless steel double sink, hot and cold pressure water system, 105 gallon fresh water tank, 3 burner CNG gimballed stove with oven(to be repaired or replaced) spacious ice box, Formica coutertops. Ample preparation area and comfortable ventilation system with a port located directly above the stove/oven area. Garbage storage drawer is included. Multiple AC outlets in cabin.

Nav Equipment

Compass tick
Navigation lights tick

Pedestal steering, pedestal guard, brake and fold down table.

Deck Gear

Sail cover tick
Swim Platform tick
Swim Ladder tick

2 halyard winches
2 sheet winches
1 anchors
0.00m (0'0") of chain
Bow pulpit, stainless steel stern rail, stainless steel swim ladder, stainless steel fender rack, double lifelines, mooring cleats teak handrails, ondeck anchor well, anchor line reel, cockpit seat lockers, molded in non skid deck.


T-shaped cockpit, pedestal steering with engine controls and lighted compass. Pedestal guard with table brake. Wraparound coamings.

Safety Equipment

Life jackets tick
Horn tick

1 bilge pumps (1 manual / 1 electric)

European running lights.
Fire extinguishers, emergency tiller, anchor and line. Double lifelines, stainless steel bow pulpit, stern rail fender rack and fold down swim ladder.

Broker's Comments

The Hunter Marine Group has created luxury, style, grace and performance in this 1985 Hunter 40. Above decks she sports the lines of a winner of races as well as being a most seaworthy yacht for the longest of sea voyages in comfort and reliability. She is graced with a large sail area and the comfortable cabin and galley area proves the point the moment you enter. This vessel is ready for the longest of voyages or gathering family and friends for a weekend of sailing and livaboard comfort. This is a must see for those who have a heart for sailing. These boat details are subject to contract.
Note: Offers on the asking price may be considered.

This Hunter 40 has been personally photographed and viewed by Pete of Boatshed Texas. Click here for contact details.
Disclaimer The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed. These particulars are not and shall not form part of any offer or contract for the sale of the vessel and are supplied on the understanding that all negotiations shall be through Boatshed, who act as agents for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and, where considered appropriate, at his own expense, to employ qualified agents to carry out structural and/or mechanical and/or electrical surveys and inspections in order to assess the actual condition of the vessel before purchase.