Inland Steel Cruiser/Fishing Boat

This boat has been sold but here are some boats that are still For Sale

Inland Steel Cruiser/Fishing Boat

Boat REF# 32270
Price removed from sale/
LOA 7.60m (24'11")
Year unknown year
Construction Steel
Underwater profile Full-displacement
Berths 3
Engine 1 x diesel 37hp, 1.5 BMC (unknown year)
Lying Suffolk

I want to see full spec & up to 80 photos of this boat,register me now

Extra Details

Designer
Builder
Lying Suffolk
Fuel capacity 1 x 45.5 ltr (10.0 G)
Water capacity 1 x 0.0 ltr (0.0 G)
Holding tank capacity 0 x 0.0 ltr (0.0 G)
Last survey Not Recorded

Mechanical

Engine 1 x diesel 37hp
1.5 BMC (unknown year)
Engine Hours Not Recorded
Engine Cooled Fresh Water
Steering Wheel
Drive Shaft
Prop(s) 3 blade
Fuel consumption (approx) 3.0 ltr (0.7 G) /hour At Cruising Speed
Cruising speed (approx) 5 knots
Max speed (approx) 7 knots
The BMC engine was rebuilt in approximatley 1997 and has only been run a few hours since this time.

Dimensions

LOA 7.60m (24'11")
LWL 0.00m (0'0")
Beam 2.10m (6'11")
Draft Min 0.30m (1'0")
Draft Max 0.30m (1'0")
Displacement 0kg (0.0lbs)
Headroom 1.50m (4'11")
Storage Dry storage

Electrical Systems

12 volt, 1 batteries charged by: engine

construction

Steel construction with Full-displacement underwater profile, paint finish
An unusual craft with a steel hull and wooden structure. The boat will make an ideal budget inland fishing vessel. THe fuel tank capcaity is approximate. Water tank capacity is unknown

Accommodation

Cooker tick Oven tick
Sink tick Curtains tick
Manual water system tick    
Handbasin 0
Shower 0
The cabin contains basic accomodation comprising 3 single berths and galley with two ring hob and oven.
3 berths with 0 doubles and 3 singles in 1 cabin(s) 2 burner gas cooker

Deck Gear

1 anchors
(Fishermans)
0.00m (0'0") of chain

Broker's Comments

Register with Boatshed to see 20 extra photos of this Inland Steel Cruiser/Fishing Boat .
This boat offers the opportunity to get on the water for very little money and the unique style of the boat will make it an ideal fishing boat for the Norfolk broads with its open cockpit together with basic accommodation.

The boat does of course need some tidying up but on the surface it does look cosmetic as there is evidence of reasonable maintenance on the steel hull.


These boat details are subject to contract.
Note: Offers on the asking price may be considered.

This Inland Steel Cruiser/Fishing Boat has been personally photographed and viewed by Will of Boatshed Suffolk. Click here for contact details.
Disclaimer
The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed, these particulars are not a part of any contract or offer and are supplied on the understanding that all negotiations shall be through Boatshed Brokerages, who are acting as brokers for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.
Feedback Form