Oyster Mariner 35 Extended
Oyster Mariner 35 Extended for sale | 11.48m (37'8") | 1980 | 1x diesel 29hp | GRP Construction | Fin underwater profile | 6 sleeping berths | Boat REF# 145711
This boat has been sold but here are some boats that are still For Sale
|Designer||Holman & Pye|
Discounts available from our Preferred Partners
|Fuel capacity||300.0 ltr (66.0 USG) Total - 1 Tanks|
|Water capacity||300.0 ltr (66.0 USG) Total - 3 Tanks|
|Holding tank capacity||25.0 ltr (5.5 USG) Total - 1 Tanks|
|Engine||1 x diesel 29hp|
|Engine make and model||Volvo Penta D1-30 (2005)|
|Engine Hours||Not Recorded|
|Prop(s)||Fixed 3 blade|
|Fuel consumption (approx)||2.0 ltr (0.4 USG) /hour At Cruising Speed|
|Cruising speed (approx)||6 knots|
|Max speed (approx)||7.5 knots|
Engine & Saildrive new 2005
750nm range at 5knots
3 x 120ah Batteries new 2008
1 x 75ah battery (engine start)
2 x 75w solar panels
Kiss wind generator
Honda 1000w generator 110v
Dynaplate grounding plate (SSB)
Copper grounding plate (Lightning protection)
|Draft Min||1.60m (5'3")|
|Draft Max||1.60m (5'3")|
Rig10% discount on rigging
Sloop rigged Kemp Aluminium spars (unknown year) with Stainless Steel standing rigging (2002)
SailsNew Sails Upgrade?
|Reefing mainsail||- Slab (2002) Fully Battened, Lazy Jacks, 2 Reefs|
|Headsail||- Furling (2002)|
|Other sails||no.3 roller furling genoa (2002)|
|Cruising chute with snuffer (1985)|
|Genoa (unknown year)|
|workin Jib (unknown year)|
|Storm Jib (unknown year)|
|Hanked on inner forestay (unknown year)|
one of the few Marina 35's to benefit from a sloop rig.
Stainless steel rigging replaced 2002 except lower shrouds that were replaced in 2008.
new removable inner forestay 2002.
2 spinnaker poles
Additional Jib for use on inner forestay to list of sails.
12 volt, 4 batteries charged by: engine, wind generator, solar panels, shore power, generator
Construction10% discount on ultrasonic antifouling
Same owner since 1987! Originally 35'3" she was modified in 2004 with a reverse transom (sugar scoop) increasing her length to 37'8" providing swim platform, extra stowage & increased waterline length.
Fibreglass hardtop sprayhood with excellent weather protection & visibility.
Underwater gelcoat peeled, hull dried for 6 months and new epoxy coatings applied in 2009 to repair minor osmosis. No osmosis was found in the GRP laminate.
|Total # of berths||6|
|No. of double berths||2|
|No. of single berths||2|
|Heads||1 heads (Manual)|
|Pressurised water system|
|Hot water system|
|Fresh water wash|
|Raw water wash|
Custom fit out with aft saloon, midships galley & nav station.
Large climb in cokpit locker/workshop with workbench & vice.
Vetus holding tank with macerator pump.
2 x Stainless steel & 1 x flexible water tank
PUR Power Survivor Watermaker 5L/h
Pressurised salt water system for deck wash & galley with charcoal and ceramic silver filters on galley taps.
3 burner propane Stove
Raytheon SL70 Radar (new scanner 2010)
Firdell radar reflector
Raytheon RC420 chart plotter
Raymarine A50 Chart Plotter with European chart (2010)
Raymarine handheld VHF
Towed Log - Wasp Globemaster
Autohelm 6000 Autopilot
Walker Log & Speed
Seafarer echosounder and cockpit repeater
Icom 706Mk11G SSB / Ham radio with automatic tuner and pactor 3 modem for radio, weather & email.
Plastimo hand bearing compass
Newcom Night vision monocular
Sestrel steering compass
Rulan rudder indicator
3 halyard winches
3 sheet winches
Manual SL Sea Tiger windlass
(Bruce, Plough, Danforth, Grapnel & Fishermans)
85.00m (278'11") of chain
dinghy (unknown year)
8hp outboard, Honda, Short shaft (unknown year)
Complete Sunbrella cockpit enclosure with removable sides.
New Treadmaster deck in 2008.
Outboard lifting davit with rail mount stowage.
Outboard painted to deter thieves looking for new outboards, it is a Honda 8hp.
Rail mounted BBQ
Dive tank and regulator. (out of test)
3 bilge pumps (1 manual / 2 electric)
Sartech 406 MHz EPIRB (2008)
Profind 406 MHz EPIRB (2002)
Lifeguard 4 man liferaft 2002 (last serviced 2008)
Sea anchor - 4.57m diameter Paratech with 90m warp.
2 x horseshoe life buoys in stainless steel holders