This boat has been sold but here are some boats that are still For Sale

The boat featured is not currently for sale by Boatshed. The boat information and images presented are part of Boatshed’s back catalogue of the 20,000+ boats we have listed in the last 15 years and appear here for general information and guidance purposes about Boatshed and our boat selling systems and services
Princess 30DS  Fly Bridge

I want to see full spec & all the high res photos of this boat
Login or Register

Boat REF# 161516
Price
removed from sale
LOA 9.27m (30'5")
Year 1988
Construction GRP
Underwater profile Planing
Berths 6
Engine 2 x petrol 140hp, Volvo AQ131 (1988)
Lying Cumbria

Gallery

I want to see full spec & all the high res photos of this boat register me now or login

Extra Details

Get a quote for Marine Finance
Designer Bernard Olesinski
Builder Marine Projects
Lying Cumbria
Discounts available from our Preferred Partners
Fuel capacity 727.2 ltr (160.0 G) Total - 2 Tanks
Water capacity 204.5 ltr (45.0 G) Total - 1 Tanks
Holding tank capacity 50.0 ltr (11.0 G) Total - 0 Tanks

Mechanical

Engine 2 x petrol 140hp
Engine make and model Volvo AQ131 (1988)
Engine Hours Not Recorded
Engine Cooled Direct
Steering Wheel
Drive z
Prop(s) 4 Bladed
Fuel consumption (approx) Not Recorded
Cruising speed (approx) 18 knots
Max speed (approx) 21 knots

Dimensions

LOA 9.27m (30'5")
Beam 3.35m (11'0")
Draft Min 0.91m (3'0")
Draft Max 0.91m (3'0")
Displacement 8,820kg (19,448.1lbs)
Headroom 1.88m (6'2")

Electrical Systems

12 volt, 3 batteries charged by: engine, shore power

Construction

10% discount on ultrasonic antifouling
Construction GRP
Underwater profile Planing
Finish Gelcoat finish

Accommodation

Total # of berths 6
No. of double berths 3
Cabin(s) 2
Handbasin 1
Shower 1
Heads 1 heads (Sea Toilet)
Cooker tick
Grill tick
Oven tick
Sink tick
Fridge tick
Carpet tick
Curtains tick
Cabin heating tick
Pressurised water system tick
Hot water system tick

Forward Cabin with good size double berth and hanging lockers. Cabin door leading aft into the dinette on the port side with seating for 4 that also converts into a double berth. The galley is opposite with stainless steel sink. mixer tap and 2 burner cooker. Steps lead up in to the saloon which has a L shaped sofa to starboard and a bench sofa to port. Moving aft again through the sliding patio style door leads you to the aft cockpit area with a full width bench seat, there are cockpit cushions for this area.

2 burner gas cooker

Nav Equipment

Compass tick
Speed tick
Log tick
GPS tick
Stereo tick
Clock tick
Barometer tick
Navigation lights tick
Echo sounder tick

Deck Gear

Cockpit cover tick
Warps tick
Fenders tick
Boathook tick
Swim Platform tick
Swim Ladder tick
Instrument Covers tick
Cockpit Enclosure tick

1 anchors
(CQR)
10.00m (32'10") of chain
20.00m (65'7") of warp

Safety Equipment

10% Discount on courses

2 bilge pumps (1 manual / 1 Electric)

Broker's Comments

Boatshed Cumbria are pleased to offer this Princess 30 DS. The craft has the Fly Bridge option with further seating for four repeat engine controls and instrumentation. The Princess 30 DS offers a great deal for her size, sleek good looks, spacious room aboard, a quality finish coupled with fast economical cruising make this boat excellent value.

These boat details are subject to contract.
Note: Offers on the asking price may be considered.

This Princess 30DS Fly Bridge has been personally photographed and viewed by Simon of Boatshed Cumbria. Click here for contact details.
Disclaimer The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed. These particulars are not and shall not form part of any offer or contract for the sale of the vessel and are supplied on the understanding that all negotiations shall be through Boatshed, who act as agents for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and, where considered appropriate, at his own expense, to employ qualified agents to carry out structural and/or mechanical and/or electrical surveys and inspections in order to assess the actual condition of the vessel before purchase.