Rochester Gaff Cutter

< Back to "Sail boats 27 to 34 foot"

This boat has been sold but here are some boats that are still For Sale

Rochester Gaff Cutter

Rochester Gaff Cutter

Boat REF# 4207
Price This boat has been sold
LOA 9.14m (30'0")
Year 1946
Construction Wood carvel
Underwater profile Long keel
Berths 4
Engine 1 x diesel 28hp, Volvo MD2B (unknown year)
Lying Essex

I want to see full spec & up to 80 photos of this boat,register me now

Extra Details

Designer
Builder
Lying Essex
Fuel capacity 1 x 40.0 ltr (8.8 G)
Water capacity 0 x 0.0 ltr (0.0 G)
Holding tank capacity 0 x 0.0 ltr (0.0 G)
Last survey Not Recorded

Mechanical

Engine 1 x diesel 28hp
Volvo MD2B (unknown year)
Engine Hours Not Recorded
Engine Cooled Raw Water
Steering Tiller
Drive Shaft
Prop(s) 2 blade
Fuel consumption (approx) 2.0 ltr (0.4 G) /hour At Cruising Speed
Cruising speed (approx) 5 knots
Max speed (approx) 6 knots

Dimensions

LOA 9.14m (30'0")
LWL 0.00m (0'0")
Beam 0.00m (0'0")
Draft Min 1.40m (4'7")
Draft Max 0.00m (0'0")
Displacement 0kg (0.0lbs)
Headroom 2.00m (6'7")

Rig

Other rigged Aldous Wood spars (1950), with stainless steel standing rigging (2002)

Sails

Mainsail - (unknown year)
Headsail - Hank on (unknown year)
Other sails Jib, staysail (unknown year)
Gaff rigged. Altough sails are 15 years old, they have had little use.

Electrical Systems

12 volt, 1 batteries charged by: engine

construction

Wood carvel construction with Long keel underwater profile, paint finish
Small portable fresh water container

Accommodation

Cooker tick Grill tick
Sink tick Manual water system tick
Handbasin 0
Shower 0
4 berths with 2 doubles and 0 singles in 2 cabin(s) 2 burner gas cooker

Nav Equipment

Compass tick Log tick
Echo sounder tick Barometer tick

Deck Gear

Cockpit cover tick Warps tick
Fenders tick Boathook tick
2 anchors
(Plough, Danorth)
20.00m (65'7") of chain

Safety Equipment

Fire fighting equipment tick    
1 bilge pumps (1 manual / 0 electric)
Smoke detector

Broker's Comments

Preliminary Details: awaiting confirmation by owner. Originally built in Rochester in the 40s, this traditional Gaff Cutter has been virtually re-built by her current owner, including new deck beams made of oak and larch, new sheathed ply deck. The mast and rigging will go up soon plus a final coat of paint (photos to follow), and she will be ready to sail. Inside the boat there is a remarkable amount of space - she is a unique boat with plenty of character.
See "more photos" to view 25 internal and external photos of this vessel. Photographs, analysis and comments by Chris Allan of Boatshed Essex.
Note: Offers on the asking price may be considered.

Disclaimer
The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed, these particulars are not a part of any contract or offer and are supplied on the understanding that all negotiations shall be through Boatshed Brokerages, who are acting as brokers for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.
Feedback Form