Ron Holland Half Tonner

< Back to "Sail boats 27 to 34 foot"

This boat has been sold but here are some boats that are still For Sale

Ron Holland Half Tonner

Ron Holland Half Tonner

Boat REF# 75603
Price This boat has been sold
LOA 9.00m (29'6")
Year 1977
Construction Wood
Underwater profile Fin
Berths 4
Engine 1 x diesel 13.5hp, Beta 2 Cylinder (2005)
Lying Essex

I want to see full spec & up to 80 photos of this boat,register me now

Extra Details

Designer Ron Holland
Builder Foxes of Ipswich
Lying Essex
Fuel capacity 1 x 25.0 ltr (5.5 G)
Water capacity 0 x 0.0 ltr (0.0 G)
Holding tank capacity 0 x 0.0 ltr (0.0 G)
Last survey 18/02/2005

Mechanical

Engine 1 x diesel 13.5hp
Beta 2 Cylinder (2005)
Engine Hours Not Recorded
Engine Cooled Fresh Water
Steering Tiller
Drive Shaft
Prop(s) 2 Blade
Fuel consumption (approx) Not Recorded
Cruising speed (approx) 5 knots
Max speed (approx) 6 knots

Dimensions

LOA 9.00m (29'6")
LWL 7.30m (23'11")
Beam 3.20m (10'6")
Draft Min 1.80m (5'11")
Draft Max 1.80m (5'11")
Displacement 2,400kg (5,292.0lbs)
Headroom 1.78m (5'10")
Storage Ashore

Rig

Sloop rigged Aluminium spars (unknown year), with stainless steel standing rigging (2005)

Sails

Mainsail - Slab (unknown year)
Headsail - Hank on (2000)
Halyard winches 2
Sheet winches 1
Other sails Genoa (unknown year)
No2 Yankie (2000)

Electrical Systems

12 volt, 2 batteries charged by: engine

construction

Wood construction with Fin underwater profile, paint finish
Cold moulded mahogany on oak.

Accommodation

Cooker tick Sink tick
Handbasin 0
Shower 0
Heads 1 heads (Sea Toilet)
4 berths with 0 doubles and 4 singles in 1 cabin(s) 1 burner spirit cooker

Nav Equipment

Compass tick Speed tick
Log tick Echo sounder tick
VHF DSC radio tick GPS tick
Navtex tick Navigation lights tick

Deck Gear

Warps tick Fenders tick
1 anchors
(CQR)
15.00m (49'3") of chain
10.00m (32'10") of warp
Yard storage cradle.

Safety Equipment

Life buoys tick    
3 bilge pumps (2 manual / 1 electric)

Broker's Comments

Register with Boatshed to see 37 extra photos of this Ron Holland Half Tonner .
This 1/2 Tonner is in need of some work to restore it to useable condition.
It has a recently installed Beta inboard engine and the sails are all servicable. Priced to reflect her condition this boat needs a new owner with the time to restore her.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.

This Ron Holland Half Tonner has been personally photographed and viewed by Steve Booth of Boatshed Essex. Click here for contact details.
Disclaimer
The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed, these particulars are not a part of any contract or offer and are supplied on the understanding that all negotiations shall be through Boatshed Brokerages, who are acting as brokers for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.
Feedback Form