This boat has been sold but here are some boats that are still For Sale

The boat featured is not currently for sale by Boatshed. The boat information and images presented are part of Boatshed’s back catalogue of the 20,000+ boats we have listed in the last 15 years and appear here for general information and guidance purposes about Boatshed and our boat selling systems and services
Rosborough RF246 HSV

I want to see full spec & all the high res photos of this boat
Login or Register

Boat REF# 171347
Price
removed from sale
LOA 7.62m (25'0")
Year 2003
Construction GRP
Underwater profile semi-displacement
Berths 4
Engine 2 x petrol 90hp, Mercury (2006)
Lying Everett, WA USA - Shown by Appointment

Gallery

I want to see full spec & all the high res photos of this boat register me now or login

Extra Details

Builder Rosborough
Lying Everett, WA USA - Shown by Appointment
Get quote for boat deliveries
Fuel capacity 545.5 ltr (120.0 G) Total - 1 Tanks
Water capacity 204.5 ltr (45.0 G) Total - 1 Tanks
Holding tank capacity 150.0 ltr (33.0 G) Total - 1 Tanks

Mechanical

Engine 2 x petrol 90hp
Engine make and model Mercury (2006)
Engine Hours engine1:   750    engine2:   1400
Engine Cooled Direct
Steering Wheel
Drive outboard
Prop(s) Composite
Fuel consumption (approx) 5.9 ltr (1.3 G) /hour At Cruising Speed
Cruising speed (approx) 15 knots
Max speed (approx) 19 knots
Engine spares tick

Spare Props.
Current props are composite and have replaceable blades.
Four 6V house batteries - one 12V AGM battery for windlass and backup start battery.
Head pump replaced in 2013.
New shift cables in 2012.
1000 Watt Heart Inverter
60 Amp ProNautic battery charger.
Bennett trim tabs.
Fuel gauge.
Windshield wipers.
The outside of the macerator thru-hull is tapped to take a NPT fitting to allow a garden hose for pumping at a RV facility when on trailer.
Equipped with a galvanic isolator.
Additional emergency bilge pumpt.
Full curtains for privacy.

Dimensions

LOA 7.62m (25'0")
LWL 7.11m (23'4")
Beam 2.59m (8'6")
Draft Min 0.46m (1'6")
Displacement 2,449kg (5,400.0lbs)
Headroom 1.98m (6'6")
Storage Dry storage

Electrical Systems

12 volt, 5 batteries charged by: engine, shore power 35 amp engine alternators

Construction

Construction GRP
Underwater profile semi-displacement
Finish Gelcoat finish

One piece hand-layed solid construction fiberglass with integral gunwale flange and floor/furniture liner. Deck and floors are sandwich core constructed with molded non-skid surfaces.
Interior trim is finished with teak moldings, Windows are tempered safety glass in molded fiberglass frames with opening windows of aluminum frame.
Deck hardware and rails, etc. are all stainless steel.
Through hulls are bronze/s.s. ball valves below waterline. Power hull extension with 3 step ladder for twin power.

The hull design and center-line keel provides stability while the straight flat run aft ensures a good turn of speed.
The full bow sections and shallow forefoot allow for both soft entry and comfortable ride while heading into or running with the seas.
Owners have the highest praise for this boat in all weather conditions.

Accommodation

Total # of berths 4
No. of double berths 2
Cabin(s) 1
Handbasin 1
Shower 1
Heads 1 heads (Manual)
Cooker tick
Sink tick
Fridge tick
Carpet tick
Curtains tick
Cabin heating tick
Pressurised water system tick
Hot water system tick
Raw water wash tick
Cockpit shower tick

A bright interior design with large safety windows all around.
She sleeps four - two in the forward private berth and two on the convertible dinette salon table.
The center triangle filler for the forward berth can be removed and placed on a post to use as center table in the cockpit.
Galley is located to port and includes a two burner propane stove, refrigerator, large stainless steel galley sink, multiple storage drawers and large prep counter space.
Wallas diesel-fired forced air heat system.
Five gallon hot water tank and cockpit shower. Screened opening center window and two large sliding windows with screens. Two 13” screened roof hatches.
Helm seating to starboard with forward-facing first mate seating on the port side.

2 burner gas cooker

Nav Equipment

Compass tick
Radar tick
VHF tick
GPS tick
Autopilot tick
Stereo tick
Clock tick
Navigation lights tick

Icom IC-M433 VHF Radio with DSC.
Lowrance Radar Global Map 8300 HD chart plotter with all US and Canadian chart set.
Integrated Fuel flow meters display.
Ray-Marine Depth Sounder
Raymarine Auto Pilot
Bennett Hydraulic Trim Tabs
Lowrance GPS
3 Lobe Radar Reflector

Deck Gear

Warps tick
Fenders tick
Trailer tick
Swim Platform tick
Cockpit Enclosure tick

Electric Lewmar windlass
2 anchors
(Plow & Fortress)
7.62m (25'0") of chain
45.72m (150'0") of warp
Dive ladder and tank storage brackets in cockpit.

Safety Equipment

LPG Detector tick
Life jackets tick
Horn tick
Boarding ladder tick

2 bilge pumps (0 manual / 2 Electric)

Extra electric emergency bilge pump.
Ladder on swim step for self rescue.
Armstrong ladder - for re-boarding with Scuba gear
Custom 2007 Load Master aluminum bunk-style trailer with electric-over-hydraulic disk brakes.

Broker's Comments

The Rosborough RF-246 HSV (High Side Vessel) is a well-respected and extremely well-constructed boat designed to take on the rough Atlantic seas. A great boat for a couple, with room for an additional couple. This vessel makes a excellent platform for diving, cruising and gunk-holing. With economical and easy-to-maintain Mercury 90 HP outboard motors. Cruise at 15 knots at about 1.3 MPG fuel burn.

A custom trailer designed for extended hauling (8'6" beam) and equipped with electric-over-hydraulic brakes for safe hauling. (Trailer is included)

This is a terrific and trailerable pocket trawler in excellent condition, ready to use today and priced to sell.

These boat details are subject to contract.
Note: Offers on the asking price may be considered.

This Rosborough RF246 HSV has been personally photographed and viewed by Randy Hacker of Boatshed Seattle. Click here for contact details.
Disclaimer The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed. These particulars are not and shall not form part of any offer or contract for the sale of the vessel and are supplied on the understanding that all negotiations shall be through Boatshed, who act as agents for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and, where considered appropriate, at his own expense, to employ qualified agents to carry out structural and/or mechanical and/or electrical surveys and inspections in order to assess the actual condition of the vessel before purchase.