Sea Sonic Centaur Cold Molded Modern Classic
Sea Sonic Centaur Cold Molded Modern Classic for sale | 8.69m (28'6") | 2006 | 2x petrol 425hp | Wood Construction | Planing underwater profile | 1 berths | Boat REF# 114132
This boat is off the market but here are some boats that are still For Sale
|Builder||Sea Sonic Boat Company|
|Fuel capacity||727.2 ltr (160.0 G) Total - 2 Tanks|
|Water capacity||38.0 ltr (8.4 G) Total - 1 Tanks|
|Holding tank capacity||11.4 ltr (2.5 G) Total - 1 Tanks|
|Engine||2 x petrol 425hp|
|Engine make and model||Mercruiser 8.2 L 496 HO (2006)|
|Engine Hours||engine1: 50 engine2: 50|
|Fuel consumption (approx)||Not Recorded|
|Cruising speed (approx)||18 knots|
|Max speed (approx)||58 knots|
The twin V8 496 cubic inch HO MerCruiser engine offers outstanding power and exceptional speed reaching a top speed of 65 Mph. The Centaur uses an electric fuel injection system that ensures optimal fuel mixture and the placement and positioning of the drive train creates the most comfortable ride possible.
|Draft Min||0.61m (2'0")|
12 volt, 2 batteries charged by: engine
Solid mahogany is used throughout, including the keel, chine, sheer line, ribs and stringers. A multi layered mahogany marine plywood is attached to the outside of this strong internal frame and, to add additional strength to the hull and transom, a sheet of Kevlar is embedded between the two layers of plywood. The result is a strong, watertight, twist-free hull which, when compared to fiberglass hulls, offers 35% more strength and rigidity.
Traditional wooden boats are built using solid wood planks that tend to shrink and expand. This creates open joints and cracks which causes leaks and damage to the finish. Planked wooden boats also require ongoing maintenance and refinishing. This does not apply to Sea Sonic Centaur due to the improved technical advances in modern boat building. Using precise Swiss craftsmanship throughout, Canadian maple is artistically inlaid on the fore and aft deck and is complimented with shining chrome hardware appointments that are both practical and stylish.
The inflexibility of construction of the Sea Sonic Centaur allows for a very hard finish to be applied. Fourteen coats of epoxy and four coats of a polyurethane containing UV protection are applied. The natural beauty of the wood shines through with its deep shine and transparency. This tough, durable exterior guarantees a watertight weather and saltwater resistant finish that is near maintenance free.
|Total # of berths||1|
|No. of double berths||1|
|Heads||1 heads (Porta Potti)|
|Pressurised water system|
|Hot water system|
The Sea Sonic Centaur's generous interior offers captain and passengers the utmost in comfort, practicality and elegance. The dashboard is well thought out as the positioning of the gauges and controls makes handling easy and exciting. The comfortable seats (for up to 6 people) are made from top of the line materials that are carefully upholstered to be great looking and able to resist wear and wet conditions. And, for those who like to soak up the sun, there is a convenient sunning pad. The combination of seating and sunning pad increases capacity to 8 people.
Entertaining guests is just as pleasurable as cruising. A wet-bar, sink and refrigerator will ensure they are always refreshed while humming along to the tunes emanating from the high-end stereo system, a standard item on all Sea Sonic boats.
The below-deck V berth offers a retreat from the sun. This is where you will also find a storage space and built-ins for supplies and personal items. A glass deck-hatch allows air and light to enter.
Raymarine Electronics with digital display.
Swimmers and water skiers will appreciate having easy access in and out of the water in the form of a stepped transom with chrome handrails. Also, a convenient hot/cold freshwater shower is located in the stern above the swim platform that is particularly nice after a saltwater swim. For drying off and tanning, a large padded sunbathing area is located on the aft deck.
2 bilge pumps (0 manual / 1 Electric)