Steel Cutter Steel Bruce Roberts 36

I want to see full spec & all the high res photos of this boat
Login or Register

Boat REF# 202740
Price
£36,000.00 Reduced
LOA 11.25m (36'11")
Year 1990
Construction Steel
Underwater profile Long keel
Berths 5
Engine 1 x Diesel 27hp, Yanmar 3HM30 3Cyl (1990)
Lying Exeter

Make an offer

Contact the Broker

  • Contact Phil Key
  • Telephone +44 (0) 1803 611330
  • Mobile +44 (0) 7968 747156
  • Email philkey@boatshedtorquay.com

Gallery

I want to see full spec & all the high res photos of this boat register me now or login

Extra Details

Get a quote for Marine Finance
Designer Bruce Roberts
Builder Owner
Lying Exeter
Discounts available from our Preferred Partners
Fuel capacity 227.3 ltr (50.0 G) Total - 1 Tanks
Water capacity 90.9 ltr (20.0 G) Total - 3 Tanks
Last survey 24/09/2009

Mechanical

Engine 1 x Diesel 27hp
Engine make and model Yanmar 3HM30 3Cyl (1990)
Engine Hours engine1:   153
Engine Cooled Direct
Steering Wheel
Drive Shaft
Prop(s) 15"*8" 3 Blade (+ Rope Cutter)
Fuel consumption (approx) Not Recorded
Cruising speed (approx) 5 knots
Max speed (approx) 7 knots

The engine was bough new in 1990 (still sealed) imported directly from Japan. It was installed during the build. Unused until launch in 2009.
Designed as a salt water cooled engine Installed in Vessell with a polar heat exchanger so only fresh water has ever gone through this engine.
The Engine has been regularly serviced by the Owner

Dimensions

LOA 11.25m (36'11")
Beam 3.35m (11'0")
Draft Min 1.83m (6'0")
Displacement 10,884kg (23,999.2lbs)
Storage In water

Rig

10% discount on rigging

Cutter rigged Sailspar Aluminium spars (1992) with stainless steel standing rigging (2009)

Sails

Discounts available from our Preferred Partners
Mainsail - Slab (unknown year) Fully Battened, Lazy Jacks, 3 Reefs
Headsail Jeckells furling Yankee 2012 - Furling (2012)
Other sails Spinnnaker (unknown year)
Cruising Chute (unknown year)
Storm Jib (unknown year)
Trysail (unknown year)
Spinnaker gear tick


The MAINSAIL was bought very lightly used in 1993. Stored until launch in 2009
Second 2013 unused staysail

Electrical Systems

12 volt, 2 batteries charged by: engine

Construction

10% discount on ultrasonic antifouling
Construction Steel
Underwater profile Long keel
Finish Paint finish

Hull shotblasted twice, 400 micron two component polyamine cured epoxy mastic coating Jotamastic 87, antifouled, BRG alkyd paint fininsh

Accommodation

Total # of berths 5
No. of double berths 1
No. of single berths 3
Cabin(s) 2
Handbasin 1
Heads 1 heads (Manual)
Pressurised water system tick
Hot water system tick
Fresh water wash tick

Nav Equipment

Compass tick
Speed tick
Log tick
Wind tick
VHF tick
GPS tick
Chart plotter tick
Clock tick
Barometer tick
Navigation lights tick
Echo sounder tick
Radar Reflector tick

Deck Gear

Sail cover tick
Spray dodgers tick
Warps tick
Fenders tick
Boathook tick
Beaching legs tick
Instrument Covers tick

2 halyard winches
4 sheet winches
Manual windlass
2 anchors
(CQR 35lb and 45lb)
35.00m (114'10") of chain
20.00m (65'7") of warp

Safety Equipment

10% Discount on courses
Liferaft tick
Life buoys tick
Boarding ladder tick
Emergency steering tick

2 bilge pumps (0 manual / 2 Electric)

Broker's Comments

The Roberts 36 design is by Australian born designer Bruce Roberts, and can be built in steel or aluminium, normally cutter or ketch rigged.
Around 200 have been built around the world, and they have a good reputation as a solid long-distance cruising yacht.
There are a number of deck/coachroof variations on the design, this one is a steel cutter rigged sloop having an aft and deep cockpit.

A substantial go anywhere sailing Yacht built to a high standard with great detailing, with only 153 hours on the engine.

Built by its current fastidious owner from 1990 until its launch in 2009 following a full Survey. is even at 12 Tonnes capable of 7 knots. This Yacht would be fully appreciated by another owner who appreciates great workmanship in a safe sailing environment, for coastal hopping or crossing oceans as a livaboard.

This Steel Cutter Steel Bruce Roberts 36 has been personally photographed and viewed by Phil Key of Boatshed Torquay. Click here for contact details.
Disclaimer The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed. These particulars are not and shall not form part of any offer or contract for the sale of the vessel and are supplied on the understanding that all negotiations shall be through Boatshed, who act as agents for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and, where considered appropriate, at his own expense, to employ qualified agents to carry out structural and/or mechanical and/or electrical surveys and inspections in order to assess the actual condition of the vessel before purchase.

If you like this boat we recommend