This boat has been sold but here are some boats that are still For Sale

The boat featured is not currently for sale by Boatshed. The boat information and images presented are part of Boatshed’s back catalogue of the 20,000+ boats we have listed in the last 15 years and appear here for general information and guidance purposes about Boatshed and our boat selling systems and services
Trident Voyager 30

I want to see full spec & all the high res photos of this boat ,
Login or Register

Boat REF# 123372
Price
This boat has been sold
Length 9.30m (30'6")
Year 1978
Construction GRP
Underwater profile Long Keel
Sleeping berths 5
Engine 1 x diesel 25hp, Sea Panther Watermota (1978)
Lying Kent

Gallery

I want to see full spec & all the high res photos of this boat , register me now or login

Extra Details

Designer Angus Primrose
Builder Trident Challenger
Lying Kent
Fuel capacity 136.4 ltr (30.0 USG) Total - 1 Tanks
Water capacity 136.4 ltr (30.0 USG) Total - 1 Tanks
Last survey 06/08/2010

Mechanical

Engine 1 x diesel 25hp
Engine make and model Sea Panther Watermota (1978)
Engine Hours Not Recorded
Engine Cooled Indirect
Steering tiller
Drive shaft
Prop(s) 3 blade
Fuel consumption (approx) Not Recorded
Cruising speed (approx) 5 knots
Max speed (approx) 7 knots
Engine spares tick

Hurth gearbox. Sterngland packing replaced 2010.
Beautiful new tiller with extension. Tiller cover. Spare tiller
Note there is not a solar panel at the moment but there is wiring already in place for a solar panel.
Voltwatch battery monitor. The Aerogen 4 wind generator has been recently serviced and pivot bearings replaced.

Dimensions

10% Discount on Boat Insurance
Length 9.30m (30'6")
LWL 7.24m (23'9")
Beam 3.05m (10'0")
Draft Min 1.22m (4'0")
Displacement 4,368kg (9,632.0lbs)
Storage On marina

Rig

10% discount on rigging

Sloop rigged Kemp Aluminium spars (1978) with Stainless Steel standing rigging (2009)

Sails

New Sails Upgrade?
Reefing mainsail - Slab (unknown year)
Headsail - Furling (unknown year)
Other sails Cruising Chute (unknown year)
Main (unknown year)
Working Jib (unknown year)
Spinnaker gear tick

Rotostay furling gear serviced 2009.
New main halyard, spinnaker halyard and topping lift 2010.

Electrical Systems

12 volt, 2 batteries charged by: engine, wind generator, solar panels, shore power

Construction

10% discount on ultrasonic antifouling
Construction GRP
Underwater profile Long Keel

Long encapsulated ballast Keel and transom hung rudder. Robustly constructed of the highest quality materials under controlled conditions by skilled craftsmen. This vessel is good for offshore sailing with a well proven design. A great survey in 2010.
Anti-fouled and polished for the new season.

Accommodation

Total # of berths 5
No. of double berths 2
No. of single berths 1
Cabin(s) 2
Sink 1
Shower 1
Heads 1 heads (Vac flush)
Stove tick
Broiler tick
Sink tick
Fridge tick
Drapes tick
Cabin heating tick
Pressurised water system tick
Hot water system tick

Superb amount of room for a classically designed boat.
The teak joinery is of a high standard and so are the furnishings and have been well preserved. Good sized berths all round. Standing headroom throughout.
Additional perspex washboard. Interior LED lighting. Note the fridge is the cool box fitted with a Waico fridge kit. Large stowage compartment under cockpit sole accessed from saloon.
Webasto Airtop 2000S (3 outlets) fitted 2006 with all ducting insulated.

Please note that a board would need to be cut in order to allow for the second double berth to be created from the main saloon. Also the shower head in the heads would benefit from a longer pipe to allow for a decent shower.

2 burner propane Stove

Nav Equipment

Compass tick
Speed tick
Log tick
Wind tick
Radar tick
VHF DSC radio tick
GPS tick
Autopilot tick
Navtex tick
Stereo tick
Clock tick
Barometer tick
Navigation lights tick
Fish Finder tick
Depth sounder tick

Navigation gear detail
Garmin GPS 128 with external aerial
Nasa Clipper GPS repeater
Stowe Micro 220 for Wind/speed/direction
Garmin 160 FIshfinder/depth
Incastec Paddlewheel/Log
Nasa Navtex
VHF Icom DSC IC-M411
Autopilot, Autohelm 1000
Furuno 1621 Radar

Deck Gear

Sail cover tick
Sprayhood tick
Spray dodgers tick
Rode tick
Fenders tick
Boathook tick
Davits tick
Swim Ladder tick
Instrument Covers tick
Bimini tick

2 halyard winches
2 sheet winches
Manual windlass
1 anchors
(35Ibs CQR and a Danforth)
60.00m (196'10") of chain
Good quality non-slip Treadmaster. Decks are uncluttered with good sidedeck space.
Note the davit is a single one on the portside of the stern.

Safety Equipment

10% Discount on courses
Liferaft tick
Life jackets tick
Life buoys tick
Danbuoy tick
Safety harnesses tick
Swim ladder tick

2 bilge pumps (1 manual / 1 electric)

Details of Safety gear
Two Parmaris Raider auto/harness, Lifejackets
Plastimo Cruiser ORC 4 man liferaft, (serviced 2010)
Extinguishers- 2 x 2kg CO2, 3 x 1kg dry powder, One auto in engine compartment.
MOB rescue sling and line, Flares (expire Dec 2011)
Firdell Blipper Radar reflector

Broker's Comments

These boat details are subject to contract.
One of Europes leading cruising yacht designers- Angus Primrose- designed the Voyager 30 for Trident to be compact externally, spacious internally and to have good sailing performance. She certainly ticks all the boxes. A tried and tested sailing yacht with offshore capabilities. She is great for family cruising. This particular example is the best of her type that I have ever seen. She has been exceptionally well maintained and the current owner has kept meticulous records since owning her in 2000. A lovely boat sailors at any stage in their career.
Note: Offers on the asking price may be considered.

This Trident Voyager 30 has been personally photographed and viewed by Suzzanne McDonald of Boatshed Kent. Click here for contact details.
Disclaimer The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed. These particulars are not and shall not form part of any offer or contract for the sale of the vessel and are supplied on the understanding that all negotiations shall be through Boatshed, who act as agents for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and, where considered appropriate, at his own expense, to employ qualified agents to carry out structural and/or mechanical and/or electrical surveys and inspections in order to assess the actual condition of the vessel before purchase.