Weldcraft Northwind 28 Flybridge Sedan
Weldcraft Northwind 28 Flybridge Sedan for sale | 8.53m (28'0") | 1975 | 1x diesel 210hp | GRP Construction | semi-displacement underwater profile | 6 berths | Boat REF# 150265
This boat is off the market but here are some boats that are still For Sale
Sold / Unavailable
|Engine||1 x Diesel 210hp, Caterpillar 3208 (1975)|
|Lying||Seattle, WA USA - At Our Docks!|
|Builder||Weldcraft Steel & Marine|
Seattle, WA USA - At Our Docks!
Get quote for boat deliveries
|Fuel capacity||681.8 ltr (150.0 G) Total - 1 Tanks|
|Water capacity||181.8 ltr (40.0 G) Total - 1 Tanks|
|Holding tank capacity||90.9 ltr (20.0 G) Total - 1 Tanks|
|Engine||1 x Diesel 210hp|
|Engine make and model||Caterpillar 3208 (1975)|
|Engine Hours||engine1: 3657|
|Fuel consumption (approx)||11.4 ltr (2.5 G) /hour At Cruising Speed|
|Cruising speed (approx)||8 knots|
|Max speed (approx)||13 knots|
Recent (July 2011) engine survey indicates the engine is in excellent condition. Engine hours estimated to be 3657 based on service records.
Annual mechanical service has been completed. She is ready for cruising.
Newer Dyno batteries recently installed.
Engine block heater.
12 volt, 2 batteries charged by: engine, shore power
This vessel was designed by Art Nordtvedt. Art was involved in the creation of Uniflite Yachts, Nordic Yachts, Fast Passage Sailboats and many other custom yachts. The vessel was built in Bellingham, Washington at the Weldcraft Steel and Marine shipyard. If you compare this boat to a 31 Uniflite it has almost the same configuration.
The hull and deck are hand-laid fiberglass. It is a hard chine semi-displacement hull design.
The hull sides have been painted with AWLGRIP.
CSR Marine just completed a bottom upgrade including epoxy barrier coat and new paint this summer.
|Total # of berths||6|
|No. of double berths||2|
|No. of single berths||2|
|Heads||1 heads (Manual)|
|Pressurised water system|
|Hot water system|
A traditional sedan design with flybridge has a large aft deck with easy access to the engine compartment.
A V-berth forward, convertible dinette and settee berth to port. The head is aft (port side) includes shower and sink. Dickenson diesel cabin heater was installed last year.
3 burner gas cooker
Garmin GPS 186 on the flybridge and a Furuno Navigator GP 30 located at the lower station along with Horizon VHF. A Raytheon ST40 is located at the lower station with a repeater on the flybridge.
Electric Maxwell 12v windlass (with remote control)
(Bruce 7.5 KG and Danforth)
6.10m (20'0") of chain
45.72m (150'0") of warp
West Marine dinghy (unknown year)
2hp outboard, Mercury, Short Shaft (unknown year)
Large access hatches in cockpit provide easy access for engine and mechanical maintenance. Ample side decks for moving forward when fishing. A custom "get home" outboard motor bracket is installed at the transom top to the aft end of the swim platform. It can handle up to 10 HP outboard. The anchor windlass has a remote control on the fly bridge. The fly bridge has a comfortable helm seat and two double chairs that convert to lounge seats.
The large aft deck provides comfortable area for fishing and crabbing and is large enough for several deck chairs.
2 bilge pumps (0 manual / 2 Electric)