This boat has been sold but here are some boats that are still For Sale

The boat featured is not currently for sale by Boatshed. The boat information and images presented are part of Boatshed’s back catalogue of the 20,000+ boats we have listed in the last 15 years and appear here for general information and guidance purposes about Boatshed and our boat selling systems and services
X-Yachts X-35

I want to see full spec & all the high res photos of this boat
Login or Register

Boat REF# 175460
Price
removed from sale
LOA 10.64m (34'11")
Year 2007
Construction GRP
Underwater profile Fin
Berths 6
Engine 1 x Diesel 20hp, Yanmar 3YM20 (2007)
Lying Kent

Gallery

I want to see full spec & all the high res photos of this boat register me now or login

Extra Details

Get a quote for Marine Finance
Designer Neils Jeppesen
Builder X-Yachts
Lying Kent

Mechanical

Engine 1 x Diesel 20hp
Engine make and model Yanmar 3YM20 (2007)
Engine Hours Not Recorded
Engine Cooled Indirect
Steering Wheel
Drive
Prop(s) 2 Bladed folding
Fuel consumption (approx) Not Recorded
Cruising speed (approx) 5 knots
Max speed (approx) 7 knots

A 3-cylinder Yanmar 3YM20 20 HP diesel engine (2007) mounted on rubber suspension with S-drive installation and 2-bladed folding propeller. 2 x 12 volt batteries charging from the engine alternator and 240 volt battery charger.
Sound insulation with special foam material in engine bay.

Dimensions

LOA 10.64m (34'11")
LWL 9.60m (31'6")
Beam 3.26m (10'8")
Draft Min 2.13m (7'0")
Draft Max 2.13m (7'0")
Displacement 4,440kg (9,790.0lbs)
Storage Dry storage

Rig

10% discount on rigging

Sloop rigged Aluminium spars (2007) with stainless steel standing rigging (2007)

Sails

Discounts available from our Preferred Partners
Mainsail Dolphin - (2008)
Headsail Dolphin - (2007)
Other sails 1 x Mainsail (Dolphin very (unknown year)
1 x Light No1 (Dolph (unknown year)
3 x Heavy No2 (Dolphin (unknown year)
1 x Spinnaker Heavy (Dolphin (unknown year)
1 x Spinnaker 0.6 (Dolphin (unknown year)
1 x Spinnaker 0.9 (unknown year)
Spinnaker gear tick

Rigged as a sloop fractional rig, keel stepped aluminium mast, stainless steel rod standing rigging. No furling system, foil fore-stay. All sails are hi tech Kevlar racing sails.

2 x Sheet winches (Harken 48-2)
2 x Halyard self tailing winches (Harken 40)
2 x Other self tailing winches (Harken 40)
Sail Wardrobe

Electrical Systems

12 volt, 2 batteries charged by: engine, shore power

Construction

10% discount on ultrasonic antifouling
Construction GRP
Underwater profile Fin
Finish Gelcoat finish

In 1979, one of today’s most successful and quality orientated production yards were established in Denmark. During the 1980’s, X-Yachts designed and built winning IOR yachts for World Class Racing. Their success with this market attracted the attention of the cruising market, which was then looking for fast, high quality and comfortable sailing yachts. It seemed very clear to them that they should use their boat building experience from the fast racers and combine this with building high performance cruising yachts. This yacht has stunning lines and looks good out of the water. The X-Yachts X-35 is not only designed to perform in close fleet racing, but also as a fast sailing yacht during summer cruises. She proves this time and time again, and gives her owner and crew much pleasure in all conditions. Her hull, keel and rudder configuration gives the helmsman a very light and direct feel of the yacht, and she responds immediately to minor corrections. The sail plan, with the powerful main sail and 106% max jib, has the ability to accelerate the X-35 out of tacks, and keep her in the fast lane upwind. The non-overlapping jib makes it easy for a shorthanded crew or family to sail the X-35, and an optional furling head stay converts the X-35 into a family friendly yacht. This boat has an impressive sail inventory.

Accommodation

Total # of berths 6
No. of double berths 2
No. of single berths 2
Cabin(s) 1
Handbasin 1
Shower 1
Heads 1 heads (Vac flush)
Cooker tick
Oven tick
Sink tick
Icebox tick
Carpet tick
Curtains tick
Pressurised water system tick

Interior: The yachts wooden interior is made of mahogany in a hand polished satin finish. The head has a water-flushed pump toilet and white gel coat units with integrated sink with mixer tap. Engine compartment: Situated below the companionway with excellent access and sound insulation with special foam material. Saloon: On each side of the rectangular shaped, foldable table (110x100 cm) are two large sofas (190 cm long). The table also has a built-in locker. Navigation area: To starboard of the companionway, the navigation table is situated together with the top opening 100 litre cooling box. Navigation and communication equipment as well as the yachts switchboard are fitted in this area. Under the hinged navigation table (50x60 cm deep) and in the alongside locker, charts and navigation equipment can be stored. Galley: To port of the companionway is the galley with a rectangular sink with a tap integrated in laminated tabletops, and a s/s gimballed gas stove with 2 hobs and an oven. The gas bottle is stored in a separate self-draining locker. Shelves and lockers with plexi-glass sliding doors give sufficient storage space for food, plates, cutlery, pans, cups and glasses.

Forward cabin: The cabin has a hinged berth (200x170/65 wide) with easy access to the three compartments below. The modern design incorporates a double wardrobe with shelves and hangers (90x55 cm deep). Natural light from the skylight is employed to compliment the polished mahogany woodwork, achieving a warm and cosy atmosphere, also during daylight.

Aft berths: The aft sleeping berths are separated into two sections via a centre wooden longitudinal bulkhead. Two berths are 200 x 130 cm wide tapered towards the aft end

2 burner gas cooker

Nav Equipment

Compass tick
Speed tick
Log tick
Wind tick
VHF DSC radio tick
GPS tick
Chart plotter tick
Autopilot tick
Echo sounder tick
Radar Reflector tick

1 x VHF Radio (Simrad RD68)
1 x Echo sounder (B&G)
1 x Windspeed
2 x Compass (Sunnto)
Autopilot
Chart plotter (Raymarine C70)

Deck Gear

Sail cover tick
Warps tick
Fenders tick
Swim Ladder tick

2 halyard winches
2 sheet winches
1 anchors
0.00m (0'0") of chain
2 x Sheet winches (Harken 48-2)
2 x Halyard self tailing winches (Harken 40)
2 x Other self tailing winches (Harken 40)

Safety Equipment

10% Discount on courses
Safety harnesses tick

2 bilge pumps (1 manual / 1 Electric)

1 x Fire extinguisher
Jackstays
1 x Radar reflector
Harnessed eyes
1 x First aid kit
Bilge pumps

Broker's Comments

These boat details are subject to contract.
The X-Yachts X-35 is not only designed to perform in close fleet racing, but also as a fast sailing yacht during summer cruises. She proves this time and time again, and gives her owner and crew much pleasure in all conditions. Her hull, keel and rudder configuration gives the helmsman a very light and direct feel of the yacht, and she responds immediately to minor corrections. The sail plan, with the powerful main sail and 106% max jib, has the ability to accelerate the X-35 out of tacks, and keep her in the fast lane upwind. The non-overlapping jib makes it easy for a shorthanded crew or family to sail the X-35, and an optional furling head stay converts the X-35 into a family friendly yacht. She has great lines and an impressive sail inventory.
Note: Offers on the asking price may be considered.

This X-Yachts X-35 has been personally photographed and viewed by Suzzanne McDonald of Boatshed Kent. Click here for contact details.
Disclaimer The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed. These particulars are not and shall not form part of any offer or contract for the sale of the vessel and are supplied on the understanding that all negotiations shall be through Boatshed, who act as agents for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and, where considered appropriate, at his own expense, to employ qualified agents to carry out structural and/or mechanical and/or electrical surveys and inspections in order to assess the actual condition of the vessel before purchase.