The boat featured is not currently for sale by Boatshed. The boat information and images presented are part of Boatshed’s back catalogue of the 25,000+ boats we have listed in the last 20 years and appear here for general information and guidance purposes about Boatshed and our boat selling systems and services

Bayliner 3818

£0 Sold / Unavailable
  • Boat REF#  ·  261051
  • LOA  ·  11.58m
  • Year  ·  1988
  • Construction  ·  GRP
  • Underwater profile  ·  semi-displacement
  • Berths  ·  5
  • Engine  ·  2 x Diesel 175hp, Hino EH-700 (1988)
  • Lying  ·  Seattle, WA USA - At Our Docks!
Boatshed Seattle
Boatshed Seattle
Roger Drill

The boat featured is not currently for sale by Boatshed. The boat information and images presented are part of Boatshed’s back catalogue of the 25,000+ boats we have listed in the last 20 years and appear here for general information and guidance purposes about Boatshed and our boat selling systems and services

Extra Details

Designer Bayliner Corp
Builder Bayliner Boats
Lying Seattle, WA USA - At Our Docks!
Fuel capacity 1,363.6 ltr (300.0 G) Total - 2 Tanks
Water capacity 363.6 ltr (80.0 G) Total - 1 Tanks
Holding tank capacity 181.8 ltr (40.0 G) Total - 1 Tanks
Last survey 14/12/2016

Mechanical

Engine 2 x Diesel 175hp
Engine make and model Hino EH-700 (1988)
Engine Hours engine1= 1221
engine2= no meter
Engine Cooled Indirect
Steering Wheel
Drive Shaft
Prop(s) 4 blade
Fuel consumption (approx) 20.5 ltr (4.5 G) /hour At Cruising Speed
Cruising speed (approx) 8 knots
Max speed (approx) 13 knots
Generator output 8KVA
Generator Hours 785
Engine spares

In June of 2018, extensive maintenance was completed on both main engines and in April of 2017 full maintenance was completed on the Westerbeke 8 KW gen set. The maintenance in all cases included compete flushing out of the cooling systems, all belts replaced, all filters replaced, all fluids replaced and any warn or damaged parts replaced.
Over the last 2 years the following pieces of equipment have been replaced:
Water pressure pump
Macerator pump
Shower sump pump
Two bilge pumps
Both head pump motors
The original Bayliner steering system was replaced in 2017 with Sea Star helm pumps.

Dimensions

LOA 11.58m
Beam 4.11m
Draft Min 0.97m
Draft Max 0.97m
Displacement 7,937kg (17,500.0lbs)
Headroom 1.95m
Storage On marina

Electrical Systems

12 volt battery, 8 batteries charged by: engine, shore power, generator

Construction

Construction GRP
Underwater profile semi-displacement
Finish Gelcoat finish

Bayliner has built over a thousand of the 38' model. The hull design includes tunnels for the propellers which provide better performance .
All hulls are hand laid up solid fiberglass. All deck are cored for strength and insulation.
The vessel was hauled in August of 2018 and all zincs were replaced. The hull was polished and about 80% of the bottom painted.

Waterline Boats / Boatshed does not independently verify capacities and measures, which are reported from seller-provided information and/or literature.

Accommodation

Total # of berths 5
No. of double berths 2
No. of single berths 1
Cabin(s) 2
Handbasin 3
Shower 1
Air conditioning 2 Air conditioning Units rated at 24000 BTU/h
Heads 2 heads (Electric)

Entering from the aft cockpit you find a U-shaped dinette to port. The upholstery was replaced in 2015 and extra drop-in cushions were added in 2018 to make a large single.
To starboard is an L-shaped counter with sink (the sink faucet is not connected). The storage area under counter is set up with hatches to access the diesel forced air heater. The heater was replaced in 2017 with a Calaer 4-KW forced-air unit.

All the floors in the saloon, galley and guest stateroom have solid teak and holly soles.

The galley is two steps down to starboard. The original electric galley stove was replaced with a three-burner propane stove and the refrigerator was replaced with an Isotherm freezer/refrigerator in 2017.

Entrance to the guest stateroom is to port and it has a full-size double berth. Access to the guest head is forward and the shower/tub is forward. There is also a second door to the head from the companionway.

The master stateroom is forward with its own head. Access to the shower/tub is to port. The berth is a centerline queen and has the standard cushion with a 2" memory foam topper. Access to the flybridge is from the aft cockpit . The bridge has three helm chairs and plenty of deck area.

3 burner gas cooker/stove

Accommodation

Cooker/stove
Grill
Oven
Sink
Refrigerator
Freezer
Carpet
Curtains
Air conditioning
Cabin heating
Pressurised water system
Hot water system
Microwave

Entering from the aft cockpit you find a U-shaped dinette to port. The upholstery was replaced in 2015 and extra drop-in cushions were added in 2018 to make a large single.
To starboard is an L-shaped counter with sink (the sink faucet is not connected). The storage area under counter is set up with hatches to access the diesel forced air heater. The heater was replaced in 2017 with a Calaer 4-KW forced-air unit.

All the floors in the saloon, galley and guest stateroom have solid teak and holly soles.

The galley is two steps down to starboard. The original electric galley stove was replaced with a three-burner propane stove and the refrigerator was replaced with an Isotherm freezer/refrigerator in 2017.

Entrance to the guest stateroom is to port and it has a full-size double berth. Access to the guest head is forward and the shower/tub is forward. There is also a second door to the head from the companionway.

The master stateroom is forward with its own head. Access to the shower/tub is to port. The berth is a centerline queen and has the standard cushion with a 2" memory foam topper. Access to the flybridge is from the aft cockpit . The bridge has three helm chairs and plenty of deck area.

3 burner gas cooker/stove

Deck Gear

Cockpit cover
Warps
Fenders
Davits
Swim Platform
Swim Ladder
Bimini
Bow Thruster

Electric Muir Couger windlass (with remote control)
1 anchors
(Bruce 33 Lb.)
91.44m of chain
Achilles dinghy ()
(RIB)
The windlass motor was rebuilt in 2017.
The anchor pulpit was replaced with a SS anchor roller.

The Bow thruster motor was rebuilt in 2017 and two Optima glass mat batteries were installed with a separate Pro-Mariner dual bank charger under the forward berth. There is also a remote control switch on the flybridge.

A custom electric dinghy winch with remote control is built into the transom. The dinghy is mounted on Weaver snap davits. The aft deck is wired for downriggers.

In 2017 a new custom swim platform was added including two stainless steel staples with swim ladder. A fiberglass hardtop was added over aft cockpit in 2018.The center window on the flybridge is glass with pantagraph wiper and wash system.

Nav Equipment

Compass
Speed
Radar
VHF
GPS
Chart plotter
Stereo
Clock
Barometer
Navigation lights
Radar Reflector

The lower helm has a Raymarine radar/plotter with a new GPS antenna installed in 2018. An IntelliSteer wireless steering system was installed in 2018.
The is also a Standard Horizon VHF and an Alpine CD/ Stereo.

The Fly Bridge Helm has a Sitex SUS-750 CF GPS plotter, a Garmin Echo 200 depth sounder, Standard Horizon Explorer VHF w/GPS and an Alpine CD stereo.

Safety Equipment

Carbon Monoxide detector
Life jackets
Life buoys
Searchlight
Horn
Boarding ladder

3 bilge pumps (0 manual / 3 Electric)

Two of the three bilge pumps were replaced in 2018 and new auto switches at lower helm.

Broker's Comments

Just another Bayliner 38.... NOT SO!

To start with this one has a Side-Power bow thruster, solid teak and holly sole in the saloon, galley and guest stateroom, four options for heat (electric, engine, diesel forced air and don't forget reverse cycle heat A/C with two working units).

Next - The electric galley was converted to propane. NEW IN 2018 an Isotherm double-compressor freezer/refrigerator.

A hard top was added over the aft cockpit, which also enlarges the flybridge. And hh yes, the flybridge -- the usual group seating has been replaced with three comfortable helm chairs. Remember that dirty plastic window in the center? It's been replaced with a large GLASS window including a pantagraph wiper and washer.

Now down to the swim step. An enlarged custom fiberglass part has been added including two safety handrails (staples) for ease of getting in and out of a dinghy. A swim ladder is located on center. "The dinghy" is mounted on Weaver davits with a reversible winch built into the transom for tipping up against the staples so the dinghy supports can be attached to the hard top. That way you can walk across the swim step for ease of mooring either port or starboard.

OK -- I think I have said enough for now. Please take a good look at the pictures and video. The vessel is located at our docks on Lake Union. Please come down and inspect. You won't be disappointed.

These boat details are subject to contract.
Note: Offers on the asking price may be considered.

This Bayliner 3818 has been personally photographed and viewed by Roger Drill of Boatshed Seattle. Click here for contact details.
Where the particulars herein give details of a boat, whether new or used, they are intended to give a fair description of the vessel but are not guaranteed as accurate or complete. They shall not form part of any offer or contract for the sale of the vessel. The prospective purchaser is recommended to independently check the particulars and the vessel. The vendor is not selling in the course of a business unless otherwise stated. Personal property is excluded from the sale of the vessel unless specifically included in the listing specification above or in a purchase contract. Personal property may be equipment or gear not permanently attached to the vessel including but not limited to: artwork, entertainment equipment, fishing equipment, TV receivers, recreational equipment, kayaks, tools, and personal appliances. Photos that may incidentally depict owners' personal property do not convey that such items are included in the sale of the vessel unless such items are specifically listed herein. At all times, where the particulars herein give details of a new boat and/or a new boat to be supplied/built by a builder/manufacturer, or a boat to be chartered, via our introduction, we do not guarantee or assume responsibility for the accuracy or reliability of any information offered by third-party companies in respect thereof including without limitation new boat builders/manufacturers, charter companies and/or companies/businesses which are ‘Friends of Boatshed’. We shall not be responsible for, or party to, any transactions, contracts or agreements between you and such third-party providers of products or services and it is incumbent upon you to verify such details direct with such entities and contract with them at your sole discretion and on terms that you agree.

Comments 0

Please note this comments section is public. Please do not post your personal details here. To enquire about purchasing this boat, please contact the broker directly at roger@boatshedseattle.com Please read our commenting guidelines before posting.

Be the first to leave a comment or ask a question...
You must be logged in to leave a comment.
Login or register for free