This boat is off the market but here are some boats that are still For Sale

The boat featured is not currently for sale by Boatshed. The boat information and images presented are part of Boatshed’s back catalogue of the 20,000+ boats we have listed in the last 15 years and appear here for general information and guidance purposes about Boatshed and our boat selling systems and services
Islander 36

I want to see full spec & all the high res photos of this boat
Login or Register

Boat REF# 130660
Sold / Unavailable
LOA 10.97m (36'0")
Year 1978
Construction GRP
Underwater profile Fin
Berths 3
Engine 1 x Diesel 40hp, Yanmar 3JH4-E (2008)
Lying Kenmore - Shown By Appointment


I want to see full spec & all the high res photos of this boat register me now or login

Extra Details

Designer Alan Gurney
Builder Islander Yachts
Lying Kenmore - Shown By Appointment
Fuel capacity 136.4 ltr (30.0 G) Total - 1 Tanks
Water capacity 254.6 ltr (56.0 G) Total - 2 Tanks
Holding tank capacity 45.5 ltr (10.0 G) Total - 1 Tanks
Last survey 28/06/2008


Engine 1 x Diesel 40hp
Engine make and model Yanmar 3JH4-E (2008)
Engine Hours engine1:   150
Engine Cooled Indirect
Steering Wheel
Drive Shaft
Prop(s) 2 Blade Bronze
Fuel consumption (approx) Not Recorded
Cruising speed (approx) 6 knots
Max speed (approx) 8 knots

This Islander was repowered in 2008. In 2009, the current owner replaced the engine mounts, the shaft, cutlass bearing and prop. There is also a spare prop on board.


LOA 10.97m (36'0")
LWL 8.69m (28'6")
Beam 3.40m (11'2")
Draft Max 1.83m (6'0")
Airdraft 13.72m (45'0")
Displacement 6,100kg (13,450.0lbs)
Storage On marina


Sloop rigged Islander Aluminium spars (1978) with stainless steel standing rigging (1978)


Mainsail - Slab (unknown year)
Headsail - Furling (unknown year)
Other sails 165 Genoa (unknown year)
110 Blade (unknown year)
Storm Jib (unknown year)

Main sail was reconditioned at North Sails in 2009. The head sail is on a Harken roller furling and is a 145 Genoa. New running rigging by North Sails in 2009. Aluminum mast is step-mounted at keel. Double set of spreaders; 4 sets of shrouds/stays (3/8"); stainless strap chain plates (internal and external); open-barrel chromed bronze turnbuckle.

Electrical Systems

12 volt, 3 batteries charged by: engine, shore power


Construction GRP
Underwater profile Fin
Finish Gelcoat finish

The hull and deck are constructed with alternating layers of hand laminated fiberglass. The deck is cored with ply-core for strength and light weight. The current owner had the topside paint and non-skid redone in 2009. Deep draft 6' bulb fin keel.


Total # of berths 3
No. of double berths 1
No. of single berths 1
Cabin(s) 1
Handbasin 1
Shower 1
Heads 1 heads (Manual)
Cooker tick
Oven tick
Fridge tick
Carpet tick
Curtains tick
Cabin heating tick
Pressurised water system tick
Hot water system tick
Non-Smokers tick
Microwave tick

Spacious cockpit with ample seating and customized cushions with the boat's name embroidered on them. The companionway is very wide and the steps into the cabin have a gentle slope to them. This makes it very easy to enter the cabin with both arms full of groceries or gear! To starboard is the fully equipped U-shaped galley. It has a propane stove with two burners and oven, refrigerator, sink, built in microwave and lots of counter space. To port of the companionway steps is a chart table with chart storage. Aft of the chart table is a quarter berth that can also be used for storage for extra sails or gear. The saloon has two opposing couches - each of which may be large enough for someone to sleep on.. Between each couch is a custom made galley table with folding leafs. The owner has installed a flatscreen TV and a new stereo for entertainment. Forward of the saloon is the head compartment to port. It includes a recently rebuilt manual head with 10 gallon holding tank. The owner has had the plumbing lines and holding tank cleaned and scrubbed so there is no head odor. In the forepeak there is a very large V-berth with storage lockers and drawers beneath.

The main saloon is heated with a solid-fuel cabin heater.

2 burner gas cooker

Nav Equipment

Compass tick
Speed tick
Wind tick
VHF tick
GPS tick
Autopilot tick
Stereo tick
Clock tick
Navigation lights tick
TV tick
DVD tick
Echo sounder tick

Garmin 182C Color GPS/Chartplotter. Horizon Depth Sounder. Autohelm 3000. VHF Radio.

Vizio 19" HDTV with DVD player. Sirius radio with marine antennae.

Deck Gear

Sail cover tick
Spray dodgers tick
Warps tick
Fenders tick
Swim Ladder tick
Instrument Covers tick

2 halyard winches
4 sheet winches
2 anchors
9.14m (30'0") of chain
76.20m (250'0") of warp
dinghy (unknown year)
6hp outboard (unknown year)

Safety Equipment

Life jackets tick
Horn tick
Boarding ladder tick

2 bilge pumps (0 manual / 2 Electric)

Broker's Comments

This Islander 36 was repowered in 2008 with a 40HP Yanmar diesel which has only 150 hours. It has a nice interior layout with a large galley, two saloon sofas, forward and aft berths, and plenty of elbow room in between. With a new engine, new running rigging and a mainsail in nice condition, this Islander is ready to sail. The previous owner sailed it to Mexico and back - he praised its coastal cruising abilities and interior comfort. Overall the boat is in nice shape and is priced sell in today's market.

These boat details are subject to contract.
Note: Offers on the asking price may be considered.

This Islander 36 has been personally photographed and viewed by Mark Nordquist of Boatshed Seattle. Click here for contact details.
Disclaimer The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed. These particulars are not and shall not form part of any offer or contract for the sale of the vessel and are supplied on the understanding that all negotiations shall be through Boatshed, who act as agents for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.

Comments (0)

Please note this comments section is public. Please do not post your personal details here. Please read our commenting guidelines before posting.

Be the first to leave a comment or ask a question...
You must be logged in to leave a comment. Login Here