This boat is off the market but here are some boats that are still For Sale

The boat featured is not currently for sale by Boatshed. The boat information and images presented are part of Boatshed’s back catalogue of the 20,000+ boats we have listed in the last 15 years and appear here for general information and guidance purposes about Boatshed and our boat selling systems and services
Project 36 Motor Cruiser Fishing Cruiser

I want to see full spec & all the high res photos of this boat
Login or Register

Boat REF# 130253
Sold / Unavailable
LOA 10.97m (36'0")
Year 2002
Construction GRP
Underwater profile Planing
Berths 4
Engine 2 x Diesel 320hp, Cummings V8 (1997)
Lying Essex


I want to see full spec & all the high res photos of this boat register me now or login

Extra Details

Lying Essex
Fuel capacity 1,544.0 ltr (339.7 G) Total - 4 Tanks
Water capacity 341.0 ltr (75.0 G) Total - 1 Tanks
Holding tank capacity 182.0 ltr (40.0 G) Total - 1 Tanks


Engine 2 x Diesel 320hp
Engine make and model Cummings V8 (1997)
Engine Hours Not Recorded
Engine Cooled Indirect
Steering Wheel
Drive Shaft
Prop(s) 3 Blade
Fuel consumption (approx) Not Recorded
Cruising speed (approx) 16 knots
Max speed (approx) 20 knots

The engines have not been fitted they are approximately 14 years old. The beds for the engines are in place. The cruising speed and maximum speed are off course estimates.


LOA 10.97m (36'0")
Beam 3.96m (13'0")
Draft Min 0.90m (2'11")
Draft Max 0.90m (2'11")
Headroom 1.90m (6'3")
Storage Ashore

Electrical Systems

12 volt, 3 batteries charged by: engine


Discounts available from our Preferred Partners
Construction GRP
Underwater profile Planing
Finish Gelcoat finish

Unfinished project engines still to fit and interior to finish - see photos.
The fuel tanks are 2 x 90 Gallon and 2 x 80 Gallon.
Interior Insulated with 2" polystyrene.


Total # of berths 4
No. of double berths 2
Cabin(s) 2
Handbasin 1
Shower 1
Heads 1 heads (Sea Toilet)
Cooker tick
Grill tick
Oven tick
Sink tick
Fridge tick
Carpet tick
Hot water system tick

Nominally 4 berth but more could be added if required.
Ascot Hot Water Unit with pump.

2 burner gas cooker

Deck Gear

Electric windlass

Broker's Comments

The owner of this boat had the hull moulded in 2002 and has since carried out a lot of work on the fit out, he is now reluctantly selling due to illness. He would however be very happy to offer his support in the form of advice and expertise to a new owner. Clearly there is a lot of boat here with lots of potential. The interior fit out is to a good standard but lots to do! The engine beds have been prepared but the engines have not been fitted. The Cummings engines have been stored away from the boat but the owner has, we are told, had them running in recent months.
The boat is designed to be a Fast Cruiser/Fisher with a large cockpit area in comparison to the boats overall length.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.

This Project 36 Motor Cruiser Fishing Cruiser has been personally photographed and viewed by Steve Booth of Boatshed Essex. Click here for contact details.
Disclaimer The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed. These particulars are not and shall not form part of any offer or contract for the sale of the vessel and are supplied on the understanding that all negotiations shall be through Boatshed, who act as agents for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.

Comments (0)

Please note this comments section is public. Please do not post your personal details here. To enquire about purchasing this boat, please contact the broker directly at Please read our commenting guidelines before posting.

Be the first to leave a comment or ask a question...
You must be logged in to leave a comment. Login Here