Radford 450 Cutter
Radford 450 Cutter for sale | 13.72m (45'0") | 2005 | 1x diesel 60hp | Steel Construction | Fin underwater profile | 5 berths | Boat REF# 171030
|Lying||Phuket / Thailand|
|Fuel capacity||410.0 ltr (90.2 G) Total - 2 Tanks|
|Water capacity||600.0 ltr (132.0 G) Total - 6 Tanks|
|Holding tank capacity||120.0 ltr (26.4 G) Total - 2 Tanks|
|Engine||1 x Diesel 60hp|
|Engine make and model||Nanni (2005)|
|Engine Hours||Engine1: < 3000|
|Prop(s)||3 blade folding|
|Fuel consumption (approx)||6.5 ltr (1.4 G) /hour At Cruising Speed|
|Cruising speed (approx)||6.5 knots|
|Max speed (approx)||6.5 knots|
Engine hours are an estimate, the owner says they are in fact probably under 2000 Hrs as of June 2018.
|Draft Min||1.80m (5'11")|
|Draft Max||1.80m (5'11")|
Cutter rigged with stainless steel standing rigging (2005)
|Mainsail||Fraser / Doyle - Slab (2005) Stack Pack, Fully Battened, Lazy Jacks, 3 Reefs|
|Headsail||Fraser / Doyle - Furling (2005)|
|Other sails||Staysail (2005)|
|Assymetric spinaker (2005)|
|Storm Jib (2005)|
|Tri Sail (2005)|
240 volt, 5 batteries charged by: engine, wind generator, solar panels, shore power,
Long fin with skeg hung rudder.
|Total # of berths||5|
|No. of double berths||2|
|No. of single berths||1|
|Heads||2 heads (Electric)|
|Pressurised water system|
|Hot water system|
|Raw water wash|
2 burner gas cooker
Hand held VHF
Predictwind weather routing / email.
2 halyard winches
5 sheet winches
Electric Muir windlass
70.00m (229'8") of chain
Zodiac dinghy (2003)
5hp outboard, Johnson, Short Shaft (2003)
4 bilge pumps (2 manual / 2 Electric)
Life raft requires service 30/10/14.
Completed & launched in 2005 this safe, solid, steel, center cockpit, blue water cruiser has beautiful warm wood interior. Topsides were re painted Jan 2014. New Genoa and inverter charger 2018. Currently on hardstanding ( june 2018 ) she has been anti fouled and anodes replaced ready to be launched.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.