Ribcraft 7.8m

I want to see full spec & all the high res photos of this boat
Login or Register

Boat REF# 243157
Price
£17,950.00
LOA 7.80m (25'7")
Year 2012
Construction GRP
Underwater profile Planing
Engine 1 x petrol 225hp, Yamaha (2014)
Lying Isle of Wight

Make an offer

Contact the Broker

  • Contact Corinne Gillard
  • Telephone +44 (0)1983 869 203
  • Mobile +44 (0)7775 617 105
  • Email corinnegillard@boatshed.com

Gallery

I want to see full spec & all the high res photos of this boat register me now or login

Extra Details

Designer Ribcraft
Builder Ribcraft Ltd
Lying Isle of Wight
Fuel capacity 250.0 ltr (55.0 G) Total - 1 Tanks

Mechanical

Engine 1 x petrol 225hp
Engine make and model Yamaha (2014)
Engine Hours engine1:   789
Engine Cooled Direct
Steering Wheel
Drive outboard
Prop(s) 3 blade
Fuel consumption (approx) Not Recorded
Cruising speed (approx) 30 knots
Max speed (approx) 44 knots

Dimensions

LOA 7.80m (25'7")
Beam 2.70m (8'10")
Draft Min 0.40m (1'4")
Draft Max 0.70m (2'4")
Displacement 2,000kg (4,410.0lbs)
Storage Ashore

Electrical Systems

12 volt, 2 batteries charged by: engine

Construction

Discounts available from our Preferred Partners
Construction GRP
Underwater profile Planing
Finish Gelcoat finish

Nav Equipment

Compass tick
Speed tick
VHF tick
GPS tick
Chart plotter tick
Navigation lights tick

Deck Gear

Cockpit cover tick

1 anchors
(CQR)
10.00m (32'10") of chain
30.00m (98'5") of warp

Safety Equipment

10% Discount on courses
Liferaft tick

2 bilge pumps (0 manual / 2 Electric)

Broker's Comments

The current business owner of this boat has recovered the input tax on the purchase. Therefore this boat will be sold on a normal VAT invoice with 20% VAT charged on the final selling price.

Ribcraft build solid, hardwearing boats which successfully serve a variety of purposes in both the commercial and leisure sides of boating. From fast rescue craft to superyacht tenders and anything in between

The 7.8m tubes are Hypalon on the outside with Neoprene on the inside (two layers of each), reinforced with a polyester mesh in between. The hull is GRP and has very sharp forward sections transitioning to 24 degrees of deadrise aft for maximum comfort in sea. Running strakes deflect spray and add lift so the ride should be dry

This particular RIB has been working as a support boat for an events company, always driven by a commercial skipper and serviced and maintained to be used whenever required. She had a new engine in 2014 and has a yard trolley which could come with if required but no trailer.

The tubes do require some attention as does the seat upholstery however she appears sound and solid as you would expect from a Ribcraft

These boat details are subject to contract.
Note: Offers on the asking price may be considered.

This Ribcraft 7.8m has been personally photographed and viewed by Corinne Gillard of Boatshed IOW. Click here for contact details.
Disclaimer The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed. These particulars are not and shall not form part of any offer or contract for the sale of the vessel and are supplied on the understanding that all negotiations shall be through Boatshed, who act as agents for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.

If you like this boat we recommend

Comments (0)

Please note this comments section is public. Please do not post your personal details here. To enquire about purchasing this boat, please contact the broker directly at corinnegillard@boatshed.com. Please read our commenting guidelines before posting.


Be the first to leave a comment or ask a question...
You must be logged in to leave a comment. Login Here